Lexium, Close Loop, Pulse/Direction, 57mm, 1Stack
The Lexium MDrive Pulse/direction input is an integrated motor driver with numerous enhanced features for a complete motion control solution.
The LMDxP uses an isolated RS-422/485 communication interface with selectable BAUD rate ranging from 4.8 to 115 kilobits per second via a standard 9-pin D-subminiature connector. An optional USB to RS-422/485 Comm converter with cable is available and is compatible with all 32 and 64 bit operating systems.
Power and I/O
DC power and the I/O are interfaced via robust locking connectors: a 2-pin screw lock connector for power, and a pair of 7-pin spring-clamp terminal blocks with side-locking tabs for I/O.
The isolated I/O bank consists of 5 to 24 VDC inputs for step, direction and bridge enable/disable, one (1) 5.5 mA Attention output, a 12-bit analog input and six TTL level differential encoder outputs, which are not isolated. The clock and direction inputs may be programmable to multiple clock types in software, either pulse/direction, quadrature or CW/CCW
Selectable modes of operation
Unlike traditional pulse/direction devices, the Lexium MDrive Pulse/direction input may be configured to operate in the following modes of operation:
- Pulse/direction mode: The LMDxP will perform motion in response to step clock and direction signals on the inputs.
- Speed control mode: The LMDxP will intelligently control the axis velocity based upon parameter configuration in software and a signal applied to the analog input.
- Torque control mode (Closed Loop Only!): The LMDCP will intelligently control the shaft torque based upon parameter configuration in software and a signal applied to the analog input.
- Constant velocity mode: The LMDxP will intelligently control the axis velocity based upon parameter configuration in software and the value of a slew at velocity command sent over the RS-422/485 interface.