Model: NPort 5200A Series Product Category:

NPort 5200A Series

2-port RS-232/422/485 serial device servers with serial surge protection

The NPort 5200A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort 5200A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution
The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort 5200A Series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in industrial environments.Surge Protection for Serial, Ethernet, and PowerSurge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa leading-edge surge immunity solution, which is applied to the NPort 5200A serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-Step Web-Based Configuration

The NPort 5200A 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5200A web console guides users through three simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this fast 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.

COM Port Grouping
The NPort 5200A COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.


NPort 5210A, NPort 5230A, NPort 5210-P, NPort 5230-P, NPort 5250A, NPort 5210A-T, NPort 5210-P-ST, NPort 5230-P-ST, NPort 5230A-T, NPort 5250A-T