IT For Engineers Online Training

IT-for-engineers-class-banner
Share on linkedin
Share on facebook
Share on twitter

Register for IT For Engineers, our popular industrial networking classes created specifically for engineers.

Moving light years beyond isolated HMI and SCADA systems that pass limited amounts of data, we can now leverage Ethernet, Internet, Wi-Fi and Cellular technologies to relay information anywhere, anytime. To deploy this new technology, design engineers and Industrial IT professionals should be familiar with the important concepts behind Industrial Ethernet. Gain basic knowledge required for implementation of an Industrial Ethernet network. Classes are non-vendor specific.

  • Provides engineers with the knowledge necessary to bring Ethernet technology to the industrial controls world
  • Helps engineers integrate their own control designs into corporate networks

CLASS TOPICS:

CLASS 1 – DECEMBER 2, 2021 Network Essentials:

A beginner level class focused on the instruction to the Industrial Network and the principals which guide it’s use. This includes a walk though of the OSI 7 Layer model, network terminology, hardware and media. Designed for little to no experience with networking.


CLASS 2 – DECEMBER 9, 2021 – Ethernet Mechanics:

An Intermediate level class designed to illustrate how and what happens to facilitate ethernet communication across a network. This includes a dive into the Ethernet frame header, redundancy protocols, and virtual local area networks (VLAN). Including a live LAB demonstration of VLAN concepts. During the demo packet capture and analysis tools will be demonstrated.


CLASS 3 – DECEMBER 16, 2021 – IP Mechanics:

An Intermediate level class designed to illustrate how and what happens to facilitate IP based communications across different networks. This includes a dive into the IP header, addressing and subnets, routing basics, network address translation (NAT). Including a live LAB demonstration of NAT (both Source NAT and Destination NAT). . During the demo packet capture and analysis tools will be demonstrated.


TOPICS COVERED:

  • Ethernet essentials
  • OSI 7-Layer Model
  • Layer 1: Physical (Copper, Fiber, Radio)
  • Layer 2: MAC – Logical identifier for all Switches, VLANS, Unicast/Multicast/Broadcast
  • Layer 3: IP Addressing – Binary recap, Subnet Mask importance, Routers, VPNs, Firewalls
  • Network design and protocols
  • Network Devices found in Industrial Networks
  • In-depth TCP/IP Tutorial
  • Industrial Ethernet VS traditional Ethernet
  • Wireless Technologies – Radio types and architectures
  • Industrial Network Security
  • Options for Remote Monitoring and Control
  • And much more!
About the Instructor:
james bio picture


James Turner is an experienced network engineer at MSI TEC specializing in industrial networks, network hardware, M2M communications, protocols, infrastructure design, and standards.

3 CLASSES ARE OFFERED –

Dec. 2 – TOPIC: Networking Essentials

Dec. 9 – TOPIC: Ethernet Mechanics

Dec. 16 – TOPIC: IP Mechanics

TIME: Classes are 2 hours, 11:30 AM – 1:30 PM (MDT)

COST: Free

WHO SHOULD ATTEND? Control Engineers, I.T. Professionals, Systems Integrators, Engineering Managers, Design & Project Engineers, and anyone interested in understanding Industrial Ethernet.

Subscribe to our Newsletter

Be the first to learn about classes, training, webinars, products news and more.

Liked this article? Share:
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on email
Email
On Key

Related Posts

Senior Control Panel Builder – CO

LOCATION: CENTENNIAL, COLORADO
MSI Tec, Inc. is a technology-based solutions provider for industrial automation applications throughout the Rocky Mountain region and Southern California. We provide innovative technology through; robotics, precision motion control, intelligent machine control, operator interface systems, device networking for remote monitoring and control, computing systems, sensing technologies and machine safety devices. Because of our continued success and growth, we have an opening for a senior level Control Panel Builder in our Centennial, CO office. This person will be responsible for the assembly and wiring of electro-mechanical systems, including industrial control panels, and can lead a build team and manage a work cell. They possess the skills, education, and knowledge to build with very little supervision. They can collaborate with engineering to build development projects with minimal documentation.

IT For Engineers Online Training

Register for IT For Engineers, our popular industrial networking classes created specifically for engineers. Moving light years beyond isolated HMI and SCADA systems that pass